FleXprotect Assembly with Polyester Fiber Reinforcement
BSPP Female x BSPP Female 90deg Elbow End Connections
Hydraflex's FleXprotect is made from WRAS approved materials and the hose is tested in accordance with BS6920. The FleXprotect hose is free from phthalate and has a Biomaster antimicrobial additive in the black liner. Having been tested at an independent laboratory the hose alone was effective in reducing four known bacterial causes of......Read More
Total : £0.00
| Part Number | ID | Overall Length | Fitting 1 | Fitting 2 | Price each (exc. VAT) | Quantity |
|---|---|---|---|---|---|---|
| FP10PFP34PFP34-150S | 10mm | 1500mm | 3/4" Nylon Female | 3/4" Nylon Female | £25.64 |
|
| FP10PFP34PFP34-50S | 10mm | 500mm | 3/4" Nylon Female | 3/4" Nylon Female | £14.93 |
|
| FP12PFP34PFP34-150S | 12mm | 1500mm | 3/4" Nylon Female | 3/4" Nylon Female | £29.80 |
|
| FP12PFP34PFP34-50S | 12mm | 500mm | 3/4" Nylon Female | 3/4" Nylon Female | £16.88 |
|
| FP10PFP34PFP34-100S | 10mm | 1000mm | 3/4" Nylon Female | 3/4" Nylon Female | £20.29 |
|
| FP10PFP34PFP34-200S | 10mm | 2000mm | 3/4" Nylon Female | 3/4" Nylon Female | £31.00 |
|
| FP12PFP34PFP34-100S | 12mm | 1000mm | 3/4" Nylon Female | 3/4" Nylon Female | £23.34 |
|
| FP12PFP34PFP34-200S | 12mm | 2000mm | 3/4" Nylon Female | 3/4" Nylon Female | £36.26 |
|
Total : £0.00
Hydraflex's FleXprotect is made from WRAS approved materials and the hose is tested in accordance with BS6920. The FleXprotect hose is free from phthalate and has a Biomaster antimicrobial additive in the black liner. Having been tested at an independent laboratory the hose alone was effective in reducing four known bacterial causes of hospital borne infections by over 99%; making this hose the ideal selection for medical environments.
MATERIALS OF CONSTRUCTION
Hose
EPDM RubberBraid
304 Stainless SteelFerrule
303 Stainless SteelFittings
CW617N or CW617NQUALITY & ASSOCIATED STANDARDS
Every assembly produced at Hydraflex undergoes a rigorous visual inspection, to ensure that only quality products are supplied. Hydraflex's FleXprotect hose is WRAS Approved and tested in accordance with BS6920 and compliance with ISO 22196.
APPLICATIONS
- Medical Equipment
- Water Softeners
- Cold potable water connections
- Filtration Systems
HOSE DATA
| Hose Part Number | ID (MM) | OD (MM) | WP @ 20°C (Bar) | Min Bend (MM) | Minimum Assembly Cut Length (MM) | Coil Length (M) | Ferrule |
|---|---|---|---|---|---|---|---|
| FP10 | 10 | 16 | 10 | 37 | 150 | 30 | B17X18SS |
| FP13 | 12.5 | 18.5 | 10 | 49 | 150 | 30 | B20.5X22SS |
ASSEMBLY MEASUREMENTS
Diagram 2 displaying the overall length and cut length of a hose assembly 
HOSE REDUCTION THROUGH FITTINGS
The arrow on drawing D2 denotes the 'R' measurement showing the 'Minimum Bore Through Fittings (mm)' which is reduced through the fitting tail, with a tolerance of +/- 0.2mm. The below measurements represent the minimum bore of each DN size; however, fittings will vary in bore size. For further information regarding this please contact out technical department.
| DN Size | Hose Bore (Inches) | Hose Bore (mm) | R = Minimum Bore Through Fittings (mm) |
|---|---|---|---|
| DN06 | 1/4" | 6 | 4.2 |
| DN08 | 5/16" | 8 | 5.7 |
| DN10 | 3/8" | 10 | 6.7 |
| DN13 | 1/2" | 13 | 8.7 |
| DN19 | 3/4" | 19 | 14.8 |
| DN25 | 1" | 25 | 19.8 |
| DN32 | 1 1/4" | 32 | 25.5 |
| DN40 | 1 1/2" | 40 | 31.8 |
| DN50 | 2" | 50 | 40.4 |
FURTHER INFORMATION
For any more information that you may require then please contact one of our team.
Tel: 0845 260 4334 Email: [email protected]
