Hydraquick Double Shut Off Quick Release Coupling/Plug

Hydraquick Double Shut Off Quick Release Coupling/Plug - Image 1
Click to enlarge
    Hydraflex have been supplying flexible assemblies for chilled ceiling and beams for over 30 years and have an in depth understanding of the requirements and expectations of the industry. Hydraflex's range of quick release couplings ensure a problem free installation, reducing installation time by up to 40%; with continued ease for serv......Read More
    CONTACT US

       +44 (0)845 260 4334

       [email protected]

    DOWNLOAD TECHNICAL DATA SHEET

    Hydraflex - Plumbing and Cooling Division
    Total : £0.00


    Part NumberConnection SizeConnection TypeMaterialPrice each (exc. VAT)Quantity
    CC-HQ18-12-C011/2"FemaleDZR£19.59
    CC-HQ19-34-C013/4"FemaleDZR£32.94
    CC-HQ19-34-P013/4"FemaleDZR£22.04
    CC-HQ18-12-P011/2"FemaleDZR£15.59
    Total : £0.00


    Hydraflex have been supplying flexible assemblies for chilled ceiling and beams for over 30 years and have an in depth understanding of the requirements and expectations of the industry. Hydraflex's range of quick release couplings ensure a problem free installation, reducing installation time by up to 40%; with continued ease for servicing and maintaining systems. With a 3:1 safety factor, a temperature range from -20°C to +85°C in a variety of bore sizes, Hydraflex's range of ceiling hoses are also tested and approved by BSRIA. Ceiling assemblies can be fitted with vapour sealed class O insulation to ensure maximum efficiency and fitted with end caps. - (E&OE)

    Hose
    EPDM Rubber
    Braid
    304 Stainless Steel
    Ferrule
    303 Stainless Steel
    Fittings
    CW617N or CW617N
    Every assembly produced at Hydraflex undergoes a rigorous visual inspection, to ensure that only quality products are supplied. See the below standards that Hydraflex meet:
    • Manufactured under ISO 9001:2015 Procedures
    • BSRIA BG4-2004
    • Reduced Installation Time
    • Flexible for installation I restricted areas and confined spaces
    • Demountable without harm to pipework
    Hose Part Number ID OD WP @ 20°C Min Bend Minimum Assembly Cut Length Coil Length Ferrule
    MM MM Bar MM MM M
    BX10 10 14 10 40 150 150 B15X16SS
    BX13 13 17 10 60 150 100 B18.5X19.5SS
    Diagram 2 displaying the overall length and cut length of a hose assembly
    The arrow on drawing D2 denotes the 'R' measurement showing the 'Minimum Bore Through Fittings (mm)' which is reduced through the fitting tail, with a tolerance of +/- 0.2mm. The below measurements represent the minimum bore of each DN size; however, fittings will vary in bore size. For further information regarding this please contact out technical department.
    DN Size Hose Bore (Inches) Hose Bore (mm) R = Minimum Bore Through Fittings (mm)
    DN10 3/8" 10 6.7
    DN13 1/2" 13 8.7
    DN D R A B L Z/d90deg Z/180deg Z/d360deg
    DN10 14 40 40 20 107 183 246 258
    DN13 18 60 60 22 151 258 352 540
    Working Pressure Bar (Tolerance +/- 1 Bar)
    Temperature
    Part No. Bore 20°C 30°C 40°C 50°C 60°C 70°C 80°C 90°C 100°C
    BX10 DN10 20 20 20 20 18 18 17 17 16
    BX13 DN13 20 20 20 20 15 15 14 14 13
    Theoretical Minimum Burst Pressure (Bar)
    Temperature
    Part No. Bore 20°C 30°C 40°C 50°C 60°C 70°C 80°C 90°C 100°C
    BX10 DN10 120 120 120 120 115 110 100 90 66
    BX13 DN13 90 90 90 90 88 86 83 80 53
    Formula: Pc = (TxL) + R (in mbar) Pc = Pressure Drop in mbar T = Pressure drop in mbar for one meter of hoses according to its flow capacity in M3/h (Schedule 1) L = Hose Length in meters R = Pressure drop in mbar caused by two fittings (male x female), same condition than 'T' (Schedule 2) Example: Flexible hose DN13 length 500mm 1 F - M, flow capacity 1000 l/h Pc = (3 mbar/m x 0.8m) + 23 mbar = What? Flexible hose DN25 length 800 1 F - N, flow capacity 1500 l/h Pc = (3mbar/m x 0.8m) + (2.5 mbar x 1.5) = What?