PEX Assembly with Stainless Steel Overbraid
Female x BSPT Male End Connections

PEX Assembly with Stainless Steel Overbraid - BSPP Female x BSPT Male End Connections - Image 1
PEX Assembly with Stainless Steel Overbraid - BSPP Female x BSPT Male End Connections - Image 2
PEX Assembly with Stainless Steel Overbraid - BSPP Female x BSPT Male End Connections - Image 3
Click to enlarge
    Hydraflex's PEX range of hose has been independently tested and permitted for potable water by The Water Regulations Approval Scheme (WRAS). The smoother finish of the inner lining of the hose is harder and is difficult for bacteria to grow, making this one of the first choices for tap flexibles in the health industry. The inner lining......Read More
    CONTACT US

       +44 (0)845 260 4334

       [email protected]

    DOWNLOAD TECHNICAL DATA SHEET

    Hydraflex - Plumbing and Cooling Division
    Total : £0.00


    Part NumberIDOverall LengthFitting 1Fitting 2Price each (exc. VAT)Quantity
    PX10FPMC3010mm300mm3/8" Female3/8" Male£9.33
    PX10FPMC4510mm450mm3/8" Female3/8" Male£11.34
    PX10FPMC6010mm600mm3/8" Female3/8" Male£13.36
    PX13FPMC3013mm300mm1/2" Female1/2" Male£13.08
    PX13FPMC4513mm450mm1/2" Female1/2" Male£16.09
    PX13FPMC6013mm600mm1/2" Female1/2" Male£19.09
    Total : £0.00


    Hydraflex's PEX range of hose has been independently tested and permitted for potable water by The Water Regulations Approval Scheme (WRAS). The smoother finish of the inner lining of the hose is harder and is difficult for bacteria to grow, making this one of the first choices for tap flexibles in the health industry. The inner lining is constructed from a cross linked polyethylene and over braided with a 304 Stainless Steel.

    Hose:

    PEX

    Braid:

    304 Stainless Steel

    Ferrule:

    303 Stainless Steel

    Fittings:

    Brass (Plated or Non-Plated)

    • Health Services
    • Potable Water
    • Drinking Water
    • WRAS Approved
    Hose Part Number ID OD Working Pressure Min Bend Minimum Assembly Cut Length Coil Length Ferrule
    MM MM Bar MM MM m
    PX08 8 12 20 50 80 200 B13X14SS
    PX10 10 14 20 70 150 100 B15X16SS
    PX13 13 17 20 80 150 100 B18.5X19.5SS
    The arrow on drawing Diagram 2 denotes the 'R' measurement showing the 'Minimum Bore Through Fittings (mm)' which is reduced through the fitting tail, with a tolerance of +/- 0.2mm. The below measurements represent the minimum bore of each DN size; however, fittings will vary in bore size. For further information regarding this please contact out technical department.
    DN Size Hose Bore (Inches) Hose Bore (mm) R = Minimum Bore Through Fittings (mm)
    DN06 1/4" 6 4.2
    DN08 5/16" 8 5.7
    DN10 3/8" 10 6.7
    DN13 1/2" 13 8.7
    DN19 3/4" 19 14.8
    DN25 1" 25 19.8
    DN32 1 1/4" 32 25.5
    DN40 1 1/2" 40 31.8
    DN50 2" 50 40.4
    For any more information that you may require then please contact one of our team. Tel: 0845 260 4334 Email: [email protected]